Bump 'n Jump - A Fizgig Restoration

fizgig

Permanently Banned for constant cyber bullying. Ge
Joined
Aug 14, 2010
Messages
5,869
Reaction score
61
Location
Murrieta, California
BUMP'N JUMP


Cabinet and Hardware:

Cabinet: Brand new freshly built and painted cabinet.
Metal: Stripped and powder coated brackets, speaker cover, vents
Coin Door: Powder coated black, coin chutes/accepters polished
Control panel: Sandblasted, holes evened out, primed, painted
Internal metal parts: Cleaned and painted as needed
Bolts: Polished
T-molding: New textured
Locks: New
Vinyl Leveler: New
Speaker : New 6x9
Speaker Cover: New
Buttons: New white and mustard yellow
Coin Box: Sandblasted
Cabinet handles: New by Midway

Cosmetics:

Control Panel: NOS control panel overlay

Joystick: Original, cleaned and rebuilt

Side Art: Restored and remade by me and Mikonos. Solvent inkjet decals with plotter cut.
Special thanks to Mikonos! This was a BIG project.

Marquee: Original, a few small spots of art missing.

Monitor Inner Plastic Bezel: Cleaned and clear coated

Monitor Bezel: Replaced with unfaded bezel, few light scratches.


Electronics:

Monitor: Burn-free 19" Monitor
Power supply: rebuilt, polished
Boards: cleaned
Wire harness: cleaned, zip tied
Power Cord: New
Marquee: New light fixture and bulb
Coin Door: New LED's




Let's start this one out with the "before" pictures:

DSC07934_zps30037502.jpg


DSC07935_zps2a8ffc62.jpg


DSC07936_zpsaf9d99f5.jpg


DSC07938_zps46368eff.jpg


DSC07939_zps804646c2.jpg
 
Last edited:
Looking good so far, can't wait to see the end results I know it's gonna be awesome.
Dan, any way I can get a lil tester size bottle of the maroon paint used on the sides on the cab? I need a little for super small touch ups on my cab.
 
Thanks Mike! I have to reprint the side art. Turns out the NOS piece i scanned had a bunch of flaws like yellow in the clouds so i had to go in and fix it. Will have this wrapped up tomorrow i hope.

Yeah, i can send you some paint, or give you the paint codes. Its very close but not exact. PM me your contact info again.


Looking good so far, can't wait to see the end results I know it's gonna be awesome.
Dan, any way I can get a lil tester size bottle of the maroon paint used on the sides on the cab? I need a little for super small touch ups on my cab.
 
looks great, i want to do this to my Bump n Jump cabinet! When you restore your cabs to do you completely rebuild them and do you totally replace the wiring? Im trying to get an idea of how to restore my cabs myself.
 
Some get complete rebuilds. All the games I've showcased on KLOV so far do.

The wires get hit with Bleche white, then water, then blasted with air.

looks great, i want to do this to my Bump n Jump cabinet! When you restore your cabs to do you completely rebuild them and do you totally replace the wiring? Im trying to get an idea of how to restore my cabs myself.
 
Thanks for the heads up, I really like what you do and have seen every restore thread you have posted since I joined the forums and I am hoping to be able to restore my cabs in the same fashion.
I have already begun purchasing the tools I will need to make these projects a reality and am pretty handy with power tools and electronics so it just seems like a good fit and something i definitely enjoy. if you have any other tips of the trade please let me know :)
 
Back
Top Bottom