You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
I decided to give it a go at building one of the repro Quantum PCBs that @Tronic did a few years ago. Figured I would post my progress here and maybe (hopefully) get some help if needed. The PCB is on the way along with the PLS, prom, and VDRs. I have pokeys, roms, an AVG and ram on hand and placed a large Mouser order yesterday that is attached here. I used the BOM that @i86time made back in 2016 and found subs for parts that are NLA. Once I get the parts from the Mouser order installed I will see what else I need to order. I know I am still missing some stuff. While I am waiting for parts to arrive I went ahead and burned the roms using the rev 2 MAME rom set and verified them against romident. I am not sure what the difference is between the two rev's. I am also still on the lookout for a Centipede or Tempest cabaret cabinet to put the board in. I have a 6100, power brick, service panel, ar2, and coin door already. If anyone has any tips or gotcha's from building one of these boards, feel free to share