Build a slotmachine

eken7419

New member
Joined
Mar 23, 2010
Messages
1
Reaction score
0
Location
uddevalla, sweden, Sweden
Hello! Want to start by thanking you for a nice forum.
I found this when I searched on the slot machines. In fact desire to build my own machine.
So I want some tips.

I want a multi-game with buttons, but I want to buy a touch screen and expand with later.

1 pcb or pc? (To buy the pcb should I import and it is expensive)
2 Intend to use an old smile note readers, univesal hopper, universal Coint. How does it work with other systems, not the pcb?
3 Some good sites where there are cheap parts? Prefer EU, but rather China than the U.S. when the U.S. is expensive to impotera from.


[email protected]
 
well

well you have a great idea for a project. not sure where your located because you left that out of your profile. its doable mixing brands and the sort. I will say be ready to make custom harness and look up many manuals. I can point you to a forum I run www.voy.com/56616/ I in the past had tons of great links and sites but lost all bookmarks when a computer blew out about 2 years ago. you will want to match your main proram chip and reels (or reel covers) and need to make sure your ready for some long nights. if you want to make it easier on your self buy all guts and parts same brand and model and you will find its a lot easier to work with. I will also point out some parts your going to find very hard to find and some makes virtually impossible. unlike arcade machines slots are usualy returned to makers or destroyed and there is tons less out there then you will see in a casino in their hay day.
 
Back
Top Bottom