Spriggy
New member
'Bubble Bobble' Marquee - fully revised vectorisation. Pantone Color Matching Help.
After returning to my beloved hobby after about 4 years lay-off, I've fallen back into artwork vectorisation during down-time (with a beer in had of course
) Just completed a full review, re-trace and color separation the 'Bubble Bobble' marquee vector I did years ago, when I was green and nooby!!!. From memory, was a scan from Ad_Enuff. An old project of mine I'm not happy being linked to me in its old state.
Color matching needed and if possible, dimensions of main 'blue' background layer. Can't verify if original scan dimensions were 100% correct. Will be uploaded to Zorgs Vectorlib ... as was the 'Jungle Hunt' Marquee I recently fully re-traced(from a good scan), color separated, pantone color matched. Also up a Vectorlib.
Cheers.
[Multiple smaller color separations shown in a single layer at bottom (pic attached), to keep picture compact]

After returning to my beloved hobby after about 4 years lay-off, I've fallen back into artwork vectorisation during down-time (with a beer in had of course
Color matching needed and if possible, dimensions of main 'blue' background layer. Can't verify if original scan dimensions were 100% correct. Will be uploaded to Zorgs Vectorlib ... as was the 'Jungle Hunt' Marquee I recently fully re-traced(from a good scan), color separated, pantone color matched. Also up a Vectorlib.
Cheers.
[Multiple smaller color separations shown in a single layer at bottom (pic attached), to keep picture compact]
