Bram Stoker's Dracula - Drop Bank wiring Question

kastawaykid

New member
Joined
Nov 10, 2004
Messages
127
Reaction score
0
Location
Wisconsin
Hi,

Can someone please help me with a wiring issue I am having with the Drop Bank Target? My BSD is a basket case, which was gutted out for parts before I got it, so the coil was missing. I have four wires hanging where the coil should be. I know the Blue-Brown wire is the Drive wire and the two violet wires go to the coil also. Does anyone know where the 4th wire goes? Can someone take a picture of this for me?

Please let me know,

Thanks,
Brian
 
Mine has the blue/brown wire on one coil lug. then there are three purple/green wires (two big, one small) on the other coil lug. Then the microswitch on the assembly has a green wire on the middle terminal, and two white/green wires on the unbanded side of the swich.
 
Thank you so much for the info. The small purple wire was confusing me. Now if I could only get a working Mist motor and figure out the wiring on that.

Thanks again,
Brian
 
I actually got the motor and gear assembly today from Marco, but it was completely dead when I tried to power it up with my bench supply (The gears seemed to be binding). I have a replacement on the way, but I am kind of leery on how the replacement is going to be. Maybe I could replace the gear on the motor of the old one with something from the hobby store. Does a certain wire have to go on a certain post on the motor? Or are they interchangeable?

Thanks,
Brian
 
Back
Top Bottom