BP Micro EP-1140 Guru Please... 2532's & BPWSoft-03 Software.

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
BP Micro EP-1140 Guru Please... 2532's & BPWSoft-03 Software.

I cannot figure out how to burn any other roms except whats listed in the software. Here is a snap below with all the 2532's this unit should handel default out of the box.

How do I get the unit to handel TMS2532JL45'S

I have looked all over this software but nothing jumps out at me on how to set it up for them.
 

Attachments

  • 2532.jpg
    2532.jpg
    45.1 KB · Views: 14
I cannot figure out how to burn any other roms except whats listed in the software. Here is a snap below with all the 2532's this unit should handel default out of the box.

How do I get the unit to handel TMS2532JL45'S

I have looked all over this software but nothing jumps out at me on how to set it up for them.
What message do you get when you click the "Info SocketModule" button on the right? It's been awhile since I used a BP Micro, but maybe a socket adapter was needed?

Bill
 
All of the TI 2532's have JL in the numbering. The ones that you have are TI TMS2532. They program at 25V. The 45 is the access speed. They are 450nS read/write speed. Which is the original speed used in Williams boards.

Just set the software for TMS2532 and go to town.

ken
 
What message do you get when you click the "Info SocketModule" button on the right? It's been awhile since I used a BP Micro, but maybe a socket adapter was needed?

Bill

Hey man it says the EP-1140 does not support socket modules.
 
All of the TI 2532's have JL in the numbering. The ones that you have are TI TMS2532. They program at 25V. The 45 is the access speed. They are 450nS read/write speed. Which is the original speed used in Williams boards.

Just set the software for TMS2532 and go to town.

ken

For some reason its working this morning. I have burned two in a row.

Can you change the voltage in the software somewhere?

How do I ID Roms? I found this...

http://www.coinop.org/RomId.aspx

What do the guys over at mame use?
 
i don;t think you can change the voltages, but i could be wrong.
for how do i identify roms -
google winromident
 
Back
Top Bottom