Boxer Machine coin selector

Dholden99

New member
Joined
Dec 17, 2016
Messages
4
Reaction score
0
Location
Louisville, Kentucky
I aquired a Punch Line boxer machine with a bad Comestero coin selector. It currently uses a 10 pin ribbon, but I would like to switch it out with a generic single coin unit I have lying around. Anyone familiar with the wiring on this pcb, or know how I can make this work? I saw an unused set of inputs on the bottom left of the main board (pictured), with12v/In/Out/Ground, but am unsure of their purpose. Thanks in advance.
 

Attachments

  • 20170114_184452.jpg
    20170114_184452.jpg
    165.8 KB · Views: 2
  • 20170114_184316.jpg
    20170114_184316.jpg
    190.7 KB · Views: 2
  • 20170114_184255.jpg
    20170114_184255.jpg
    190.1 KB · Views: 2
Back
Top Bottom