Bosconian CP with a Galaga harness?

mitchschaft

Well-known member

Donor 2011
Joined
Nov 7, 2010
Messages
1,110
Reaction score
71
Location
Bartlett, Tennessee
Ok, here is what I'm trying to do. I already have a full Galaga power supply, control panel, wire harness. I also have a Mappy PCB that I can plug in and play at will.

I want to know if I can buy a Bosconian control panel and PCB and plug it into a galaga wiring harness/power supply. Has anyone done this? I think the pinouts are all the same, just the control panel for Bosconian is a 8-way j-stick.

If I can do this, then I can probably hook up all the other 4-way j-stick (or 8-way) games like galaga 3 to my galaga setup (even though I don't have a cabinet so it'll be just the control panel, psu, power supply sitting on my desk :p). I'm just desperate to have something to play since nobody around here sells cabs.
 
Last edited:
I know you can plug in the PCB and I would bet the CP too.

I bought one of those adapters to play JAMMA boards in a Galaga, ran some extra wires to the CP and now I can swap to a custom panel and play MANY games. Or remove the extra crap and go back to a stock Galaga in 30 minutes.
 
Here's my setup.

Quote from another post, "cabinets are overrated." lol

attachment.php
 

Attachments

  • 2011-04-28_22-34-22_67 (Large).jpg
    2011-04-28_22-34-22_67 (Large).jpg
    94.7 KB · Views: 39
Back
Top Bottom