Bob Roberts -5 volt line

Krusher

New member

Donor 2015
Joined
Dec 5, 2009
Messages
2,176
Reaction score
35
Location
Montebello, California
UPDATES, Help needed uncrimping tips ideas?!?

******Looking for the connector still in the below pics..*******
even if its butchered from a Neo 29..
Still looking for these connectors.
will be trying some from places some time later.
but in the mean time putting out the feeler to see if anyone still has
one of these :)




Hey, quick question for you.
I ordered from bob roberts a couple of weeks ago
some custom length -5 volt lines from bob roberts.
My question is this, I unpacked them, am trying to work on my machine/cab A NEO 29

I noticed though the end for the connector (MOLEX) Is round.
The other connections on my actual connector is SQUARE and hollow looking??!! ACK UGH DAMNIT!
So, does anyone know does Bob Roberts Offer these with a Square end instead of
the round molex connector?

I did not discover this until tonight Because of everything else going on in my life.
I decided to hopefully knock out my Neo 29 project and get it done as kinda a distraction.
to only run into another disapointment :(

anyone ??
Please lemme know. of if you have any suggestions??
THANKS!!

Emailed bob as well hoping he will have these connectors..
FINGERS CROSSED!!
 

Attachments

  • Neo291.jpg
    Neo291.jpg
    83.1 KB · Views: 39
  • neo292.jpg
    neo292.jpg
    89.4 KB · Views: 27
Last edited:
negative dont have

Bob got back to me. negatory.. he dosent have the square molex for the candy cabs.. =( bummer.. at this point I'd even take a used cut out connector and try to salage one of the connectors out...
 
Not a problem here is pics.

Cool i aprecate it,
I dont have a pic of the piece outside of the connector.
here is some pics of the connector viewed from the bottom.
thanks

Can I see a pic? I might have what you are looking for.
 

Attachments

  • CIMG4894.jpg
    CIMG4894.jpg
    83.1 KB · Views: 119
  • CIMG4892.jpg
    CIMG4892.jpg
    85.1 KB · Views: 86
  • CIMG4895.jpg
    CIMG4895.jpg
    89.4 KB · Views: 92
yea the square.

i think its bigger in the connector than the lock in spot. I dunno.
size i guess would be a option to figure too.
I really dont want to have to yank out any of the connectors though.

Damn, Lol, almost as bad as the not enough space..
Just a lil shy of score :)
 
Yea, I thought about scrapping.

I even checked the bucket o wires i bought from the local arcade closing..
so far no luck though..
A computer store is a good idea. But from ones ive worked with they were the
round too. ill have to start diggin and checking around..
from what bob says these are japanese and harder to come by
but scrapping stuff who knows :)
ill be looking at everything electronic different for a while :)


If you have any junk computer power supplies laying around, you can see if you can get a pin out of the atx connector, or buy an adapter at a computer store that may have this plug...

http://www.playtool.com/pages/psuconnectors/connectors.html#pciexpress8
 
Cool i aprecate it,
I dont have a pic of the piece outside of the connector.
here is some pics of the connector viewed from the bottom.
thanks


Are there any markings on the housing? I can take a look in my catalogs on Monday and any markings you find will help me in the search...
 
ok. i checked and nothing marked on them

ok. I checked everything on and around the connector. I can't find anything at all..
=( was hoping there would be a clue.
Are there any markings on the housing? I can take a look in my catalogs on Monday and any markings you find will help me in the search...
 
Back
Top Bottom