Boards: Midway/Namco, Nintendo.......

Raven

New member
Joined
Apr 30, 2006
Messages
3,539
Reaction score
37
Location
Argyle, Texas
Rating - 100%
64   0   0
Boards: Midway/Namco, Atari, Nintendo.......

Ok, this will be a new thread for the classic, non-Jamma boards I'm pulling out. I will try to update it as I get to them all. Prices do not include shipping unless stated. All boards sold as-is (although I will try and re-test before shipping). Paypal accepted with applicable fees added to final total. Most shipping will be USPS, including international. Ok, I think that about covers it....

Galaga: tested working 04/29 $150 shipped
Galaga: tested working 04/29 $150 shipped SOLD
Pac Man: tested working 05/12 $100 SOLD
Pac Man: tested working 05/12 $100 SOLD
Pac Man: tested working 05/13 $100
Pac Man: tested not working (no sync bus controller, no V-RAM addressor card) $50 obo
Ms Pac: tested working 05/16 (has fast 6F) $120
Galaxian: tested working 04/30 $75 SOLD
Galaxian: tested not working 04/30 (hangs in boot up) $40
Jr. Pac Man (conversion PCB): tested working (but has dots through out screen) $75
Jr. Pac Man (Field Kit PCB): tested not working (black screen, resistor at D9 smoked when powered up) $40

4x Centipede: tested not working (all look complete, didn't trouble shoot them) $100 for all 4

Mario Bros: tested working $110 SOLD
Mario Bros: tested not working (hangs booting) $50
DK 2-brd set:tested working SOLD
DK Jr: tested working $100 SOLD
DK Jr: tested not working (I have several, various issues, all should be fixable) $50 each.
Popeye: tested working, but with green jailbars on screen $50 SOLD
Punch Out!: boots up, then resets if you coin in $100
Punch Out!: gives a dead screen with a little garbage on it (video board issue) $50
Punch Out!: flaky. sometimes garbage, sometimes plays, but opponent has graphics issue. $100
Dual monitor PC-10 board: gives a blank white screen $50 obo


Jr Pac Man field kit filter board (for dedicated cabinet) $25
4-5 Ms Pac daughter card and cables, may the ROMs too. I might convert a Pac to Ms Pac if I get around to it.


I'll add more boards later. I may grab some more Atari ones. Nintendo Vs. stuff will get a new thread when I pull it all out. I'll probably throw some PC-10 into that too.
 
Last edited:
Picking up some adapters to test these boards. I tested the Galaga boards a couple of weeks ago, but will re-test again for good measure.

Is there any interest in non-working or unable to test boards this round? I've probably got some N/W Nintendo stuff, and some random classic boards I won't be able to test.
 
Picking up some adapters to test these boards. I tested the Galaga boards a couple of weeks ago, but will re-test again for good measure.

Is there any interest in non-working or unable to test boards this round? I've probably got some N/W Nintendo stuff, and some random classic boards I won't be able to test.

Depending on the boards I may be interested in the Nintendo stuff.
 
I am interested in one, if not two working Galaga boards.

Torin

I've got two that I tested tonight working fine.

Galaga #1:
IMG_0882.jpg

IMG_0886.jpg


Galaga #2:
IMG_0888.jpg

IMG_0890.jpg

IMG_0893.jpg
 
Last edited:
Boards and prices added to top.

Also, I have about 4-5 Ms Pac daughter cards, and maybe 1-2 sets of Ms Pac EPORMs. Should I converted one or both Pac boards?

Jr. Pac Man pics:
IMG_0908.jpg

IMG_0909.jpg

IMG_0910.jpg
 
Last edited:
jr pac conversion pcb works in pac with no filter board.

I think the jr pac field pcb needs the filter board (either jr pac or super pac). I assume you plugged it into your pac adapter and it smoked. You probably put AC voltages on a DC pcb..
 
jr pac conversion pcb works in pac with no filter board.

I think the jr pac field pcb needs the filter board (either jr pac or super pac). I assume you plugged it into your pac adapter and it smoked. You probably put AC voltages on a DC pcb..

Yep, that's what happened. Luckily it only looks like D9 got fried. I tried plugging it into a Galaga adapter via the filter board and it did nada.
 
I didnt say that. Neither version requires the filter board unless you have a dedicated Jr Pac cab.

So will it allow a regular Jr Pac board to be plugged into a Gaplus cab? (I *think* it has the same pinout as Mappy, other than controls, since Mappy is 2-way and Gaplus is 8-way)
 
I would assume so. Buy it and the board, and find out! Then you can tell the rest of us. :D
 
Back
Top Bottom