Boards for sale

Oryk Zinyo

Oryk Zinyo

Well-known member

VAPS


Joined
Jul 24, 2007
Messages
8,997
Reaction score
134
Location
Bremerton, Washington
Rating - 100%
120   0   0
I need to clean out the clutter and rebuild my spending account.


Bottom of the 9th - $35
Kuri Kinton - $35 Sold
Capcom Bowling - $25
Soul Edge - $35
The Real Ghostsbusters 3 player - $70 Sold
The Punisher bootleg - $50 Sold
Neo Geo 100 n 1 - $45 Sold
Donkey Kong Jr. bootleg - $50 Two board set, standard DK pinout - edge connector only. Colors are not inverted and the pic displays from the opposite direction of Nintendo DK boards.
PushMan - $60
Battle Balls - $60 Sold
Willow - $100 Sold
Rushing Heroes - $45



Fully rebuilt/tested ARII -01 - $40 Sold
Fully rebuilt/tested ARII -04 - $45 Sold

I also have some ARII -02s that I can rebuild/test if someone is interested - $45


Fully Rebuilt/tested 19" (skinny neck) standard res K7000 - $80
Fully Rebuilt/tested 25" standard res K7000 - $80 Coming Soon




I have the parts to make a few CR23 adaptors. I am also on the brink of having Sencore adaptors available. If someone really wants one I can bump them up in my que. Price is higher than the CR series due to higher cost of parts.

CR23 - $30 shipped
Sencore adaptor - $45 shipped
 
Last edited:
Oryk Zinyo said:
I actually have a few of them...
Click to expand...

good to know! my k7193 has at least 1 bad cap and needs a good cleaning, i also know it's been worked on at least twice so god knows what the underside of the board looks like as i haven't removed it.

It's still working so i'm not in a huge rush but within the next month or so i was going to start looking for a clean replacement. could you post some pics of your rebuilt ones? I'm sure i know the answer to this but how much of them do you replace (hot,flyback, full cap kit) and do you hose em down (dishwasher/some other thorough cleaning)?
 
I added another board (Willow) and marked some items sold.




Broodwich said:
good to know! my k7193 has at least 1 bad cap and needs a good cleaning, i also know it's been worked on at least twice so god knows what the underside of the board looks like as i haven't removed it.

It's still working so i'm not in a huge rush but within the next month or so i was going to start looking for a clean replacement. could you post some pics of your rebuilt ones? I'm sure i know the answer to this but how much of them do you replace (hot,flyback, full cap kit) and do you hose em down (dishwasher/some other thorough cleaning)?
Click to expand...


I recap them, replace the flyback, check for cold solder, and then run a 24 hour "burn in" test. I have never had, or had a report of, a VR or HOT fail after my testing (with the notable exception of improperly installed chassis) so I do not routinely replace them. However, more than half of my chassis have new HOT's and about a quarter of them have new VRs because these components were found failed. I also replace quite a few fuse holders for the same reason.

Normal cleaning method is to throw them in the dishwasher, unless there is a rush to get it returned; I don't like to power up a board for a few days after it leaves the dishwasher.
 
Oryk Zinyo said:
I added another board (Willow) and marked some items sold.







I recap them, replace the flyback, check for cold solder, and then run a 24 hour "burn in" test. I have never had, or had a report of, a VR or HOT fail after my testing (with the notable exception of improperly installed chassis) so I do not routinely replace them. However, more than half of my chassis have new HOT's and about a quarter of them have new VRs because these components were found failed. I also replace quite a few fuse holders for the same reason.

Normal cleaning method is to throw them in the dishwasher, unless there is a rush to get it returned; I don't like to power up a board for a few days after it leaves the dishwasher.
Click to expand...

i pretty much figured that would be your answer, pretty much complete overhaul. i'll definitely be talking to you in the future about this, great deal!
 
Which version is the DK Jr bootleg? There's several different ROMsets. One uses the Japanese level order (and should have 11,800 as the high score with 10 initials), there's some with the US ROM's (will say Nintendo of America on the title screen). There's also one called "Donkey King Jr" and another called "Junior King", that will show up with those titles on the title screen.
 
CrazyKongFan said:
Which version is the DK Jr bootleg? There's several different ROMsets. One uses the Japanese level order (and should have 11,800 as the high score with 10 initials), there's some with the US ROM's (will say Nintendo of America on the title screen). There's also one called "Donkey King Jr" and another called "Junior King", that will show up with those titles on the title screen.
Click to expand...


I'll have to plug it in again to check, but I think I gave you this info once before. I think it uses the US ROMs, I know it is not a King Jr or Junior King.
 
You must log in or register to reply here.

Similar threads

FS Game: For sale: Vindicators
Replies
12
Views
708
Khatru311
Khatru311
ArcadeJason
FS Game: project games for sale
Replies
7
Views
643
Olexo2424
Olexo2424
Humdinger
FS Game: JOUST for sale in Mississippi
Replies
2
Views
139
KaBoom1701
KaBoom1701
FS Game: For Sale: Super Off Road
Replies
0
Views
317
GroverPi
resipsa
FS Game: some games for sale
Replies
5
Views
985
PBDoughboyy
PBDoughboyy
Back
Top Bottom