Blowing fuses on the power supply on sharpshooter. Please Help!

Jacey

New member
Joined
Feb 17, 2010
Messages
6
Reaction score
0
Location
Hawaii
Blowing fuses on the power supply on sharpshooter. Please Help!

So got this machine home today and from 9am to 2pm it was playing just fine. I was in the kitchen and it just shut off. No power, so I began to check fuses. On the power supply its burning the 3 amp 250v every time. I was looking on the forum for people with blown fuses and I read check for loose wires, grounds, something with the hantarex. I'm pretty new to this so I spent the day just tracing wires and cleaning it up. Any advise would be helpful thanks.
 
look at the wire plug that goes from the arcade machine to the wall power outlet, is it a 3 pin plug? or has the ground been cut off of it, iv seen this alot in cabs that i have bought.

if so i suggest in buy a new plug end at lowes or another hardware store
 
Last edited:
Its a three pin plug. Its something with my monitor. I disconnected the monitor and it stopped blowing the fuses.
 
Its a blown hot and diodes on my chassie. Will update when those are repaired.
 
Back
Top Bottom