Blitz/Showtime Vegas Board Wiring Picture

Halcyon

New member
Joined
Jan 8, 2007
Messages
33
Reaction score
0
Location
Olathe, Kansas
Hello all - I recently made the stupid mistake of not lableing my connections when I took my Midway Vegas boardset for my Sportstation out of the cabinet to remount it.

Now that I've got everything mounted back up, I can't seem to get the buttons to function and I'm pretty positive it's because I don't have them plugged into the right locations. I've tried reviewing the wiring diagrams and manuals to no avail, so I was hoping that someone might be willing to send me some pictures of their boardset all wired up so that I can compare mine? (This is a 4-player dedicated cabinet BTW) Thank you!

Any help is much appreciated!
 
your player 1/2 button inputs will run off the JAMMA wiring, player 3/4 will use separate PLAYER 3 and PLAYER 4 headers on the board.

I forget if the optical driver board has the button inputs running through it or not, lol

it's a small board in the control panel, I think all the player wiring harnesses run from the JAMMA edge and the headers on the main board to it, and then there's additional harnesses that plug into the driver board that connect to the controls.

take a gander at this, it might help, I'm not actually at the location of my games: http://arcarc.xmission.com/PDF_Arca...idway Sportstation 25in Standard 4 Player.pdf
 
I'm familiar with the small I-40 board, and I will take a look at the PDF as soon as I get home - thanks for the reply and I'll let you know what I find!
 
Yea - no luck with that document. Any chance anyone has a good resolution picture of their boardset they could send me that's wired up correctly?
 
Back
Top Bottom