Blast city ground connection

Critchy87

Member

Donor 2019
Joined
Jan 17, 2019
Messages
47
Reaction score
5
Location
Buckhannon, West Virginia
My blast city appears to be missing a ground connection as you can see from picture. First question is do I need it and second if I do what Molex connector do I need and where do I need to connect it at I assume it would connect up somewhere with the joysticks and buttons as that's where the connector is located. Everything seems to be working fine without but don't want problems down the line from it. Thanks for any help you can provide.768D6EB2-41F0-4EB4-A721-BDFA9115E1F4.jpeg
 
and where do I need to connect it at I assume it would connect up somewhere with the joysticks and buttons as that's where the connector is located.
95% sure this goes to the hinge for the CP.

The manual will tell you for sure, and they're AMP connectors, not molex.

Both bits of info are here on the AO wiki. Manual on the Blast City page, and there's a great connector identification page as well.


 
95% sure this goes to the hinge for the CP.

The manual will tell you for sure, and they're AMP connectors, not molex.

Both bits of info are here on the AO wiki. Manual on the Blast City page, and there's a great connector identification page as well.


Thank you! Looks like one to the hinge and the other to control panel. Now just have to figure out what amp connector
 
Back
Top Bottom