Black Offset T-molding Project "in jerpordy" of not happening this time a round.

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Black Offset T-molding Project "in jerpordy" of not happening this time a round.

Ok, offset white is on order as of today. However, I've received two samples of black that both were from "R-TYPE's" and both appear to NOT BE OFFSET.

Mike29 basically was the only one who gave me measurements from their cabinet. He needs 60 feet and it's for a Dual System Vs. (I think that's what they are called). I guess gray Vs. cabinets need offset black as well. R-Type's? You guys 100% sure you need offset black molding?

So, here is the list of people who said they need this molding...

Still Want

Mike29 - 60 feet
zutton1 - 20 feet
Phetishboy - 20 feet (but would use white if have too)


Haven't Heard Back From

thefader - 20 feet
Superully - 20 feet
Van - 40 feet
Rory - 20 feet
chandonh - 20 feet
AlkalineJay - 20 feet


No Longer Need

Sectorseven - 20 feet
sohchx - 20 feet
20eyes - 20 feet


Pleases look at the attached drawing and "cross reference" your cabinets. If you still need this molding you need to let me know ASAP right away. I'm all for helping out the community but I cannot justify buying offset black molding if only a few of you need it.

attachment.php
 
Last edited:
Oh, and here are mike's dimensions... Which proves they are pretty damn close to the offset white samples I have.

21 / 32 = 0.65625 (basically all the measurements I now have are .65 to .67)
8 / 32 = 0.25 (left edge to slot)
10 / 32 = 0.3125 (right edge to slot)
 
Bill, thank you so much for doing this!!!

I am certainly in for (3) sets.

Cheers,
 
Bill,

I was one of the ones pushing. If you think I didn't follow through, I am sorry, but I think we should talk more.

The last PM I received was that my 3 set order and one other persons order was not enough, so I felt I shouldn't bother or pester you any further. I haven't received a PM since saying you were ready to go.

If there is a chance to move this project forward you can count on my 3 set order still.

Thanks,

Mike
 
I pushed as hard as possible, as the dedicated grey versus system cabinets definitely use black offset, but for some reason other people you were giving samples to couldn't figure out how to install offset t-molding.

...although what we all really need is 13/16 black offset for all the centuri cabinets. I can't believe this stuff isn't available and people on here don't make a stink about it.
 
Back
Top Bottom