Black Knight volume?

JODY

Active member
Joined
Apr 29, 2010
Messages
596
Reaction score
12
Location
Omaha, Nebraska
Black Knight Project

So I resolder about half a dozen drop target wires that were disconnected, replace two drop target coils (one now works and one still doesn't), redo a flipper and now the sound, which was at a normal level before, is so loud the floor shakes. I don't see anywhere in the manual that mentions sound level. Doing a google search and I found a pot noted on the sound board and another site that mentions a sound level wire connector.

Is the sound level for this machine controlled via a pot on the sound board or is there somewhere else it is adjustable?

I'm not familiar with the settings on this machine either. One of the three buttons inside the coin door appears to do nothing and the sticker is missing on the buttons.
 
Last edited:
black knight volume pot should be inside the coin door right behind the tilt sensor.


image-17.jpg
 
Back
Top Bottom