Black knight 2000 issue resolved

riarcadez

Member
Joined
Jul 13, 2021
Messages
152
Reaction score
22
Location
Rhode Island
Both drop targets keep resetting. So I bought 2 new target boards, an interconnecting board and a new XPIN power supply. Still no change. If I hit one target on the left bank. The other bank starts resetting and keeps resetting over and over. Same if I hit the other target on other bank. Left side keeps resetting over and over. Only idea on what could be going on? I went into switch test and it's referring to left bank as right bank and right bank as left bank. But all targets r registering.could this be a auxiliary power board? Thanks in advance.
 
Is this in the wrong thread? I see all other ads getting replies. Main at 0. Just wondering so I can post in the thread. Thanks
 
When you posted this to FB yesterday (or someone using your exact same wording) someone else commented that you likely have the signal plugs to the boards swapped. Which seems likely given your switch test results.
 
When you posted this to FB yesterday (or someone using your exact same wording) someone else commented that you likely have the signal plugs to the boards swapped. Which seems likely given your switch test results.
Oh ok I understand. I just post in more places then one. Sometimes I get different results. Was just wondering if it was posted in the wrong thread. Thank u. I'll delete this post
 
Back
Top Bottom