Black Hole Help?

clairvius

New member
Joined
Feb 18, 2012
Messages
84
Reaction score
0
Location
Port Barre, Louisiana
I got my black hole somewhat working has a brand new driver and MPU board the main lamps on the Playfield light but none of the controlled lights will work. All the bulbs are not burnt all ground mods have been completed 6v rec. Is working fine. THere is a Auxiliary Lamp Driver board in the back box don't know if that controls all the lights or not. Could that be my issue? there only $50 at K's Arcade but id hate to buy something i don't need. Thanks
 
The Auxiliary Lamp Driver board in the back box only controls the rotating lights around the backbox
 
Ahhhhh awesome now that i look at it many i should have seen the giant cable going only to the back glass lol ohh well back to the drawing board I'm ganna get this thing working right one day
 
Are your coin door lamps working?
Have you checked F5 (for continuity with a meter, not visually)?
You might also look for a broken wire at the "T" relay (or other issues with the operation of that relay).
 
Coin Lamps working fine F5 is ok didn't check the relay yet i believe i have a break in the ground wire somewhere if you isolate the ground wire to the power box some lamps work going to find the break in the wire or run a new ground and hope that fixes it for good. Thanks for the help
 
Back
Top Bottom