BK 467 at a fair price ??????

[robgest]

I contacted a seller on ebay, that had this item and simply asked if he would just sell it to me for $75 dollars shipped, and he responded that he would.... So I purchased it. Do you think it was a fair price? Also, what other adapters should I look for? it comes with 1, 2, 3, 5, 6 (2x), 7, 8, 10, 11, 16.

 

[groffdaddy]

You definitely need a #23 which is the more commonly used one.

 

[Oryk Zinyo]

I think the price was OK.

You need a CR23 for most arcade monitors such as the 4600, 4900, G07, U2000, U5000, Sanyo, large neck K7000, and a few others.

The CR31 is useful for skinny neck 13" and 19" K7000 monitors.

CR24 is useful for the WG 6100.

CR30 is used on the Matsushitsa.




The CR6 you have is good for all black and white, vector and raster, monitors I have ever encountered.

 

[tron guy]

I have that machine and I really like it. I tried using a buddys 470 and didn't like it as much. Probably because I am used to that one.

I have ONLY used adaptor 23 so far. 15 monitor rejuves.

 

[gobsgraham]

Somebody needs to sell me one of these for a good price. I will also trade any (maybe even 2 or 3 depending on what they are) of my for sale boards for one. I will give good trade value for a nice working BK with CR23.

 

[PrairieDillo]

I have this one also. The price is ok but you really need the 23 and the 31. I only use those two. I mostly have JAMMA machines although.

 

[Joshuart311]

I need the adapter 23 also. Is there a good way to make one? I have a bad neckboard from a wg4900 I could use.

 

[PrairieDillo]

I need the adapter 23 also. Is there a good way to make one? I have a bad neckboard from a wg4900 I could use.

yeah it's not hard, I actually went to Frys and got the right molex to make one for the CR31 since they are harder to find and I have a bunch of narrow neck 19" K7000 monitors.

 

[Oryk Zinyo]

I need the adapter 23 also. Is there a good way to make one? I have a bad neckboard from a wg4900 I could use.

They are fairly easy to make as long as you have the tools. The parts you need are:

1 - 12 position Molex connector, part number 03-06-1122
8 - sockets, part number 02-06-1105
Wire
Socket


Use this drawing to make the CR23: http://arcarc.xmission.com/PDF_Monitors/BK_Precision_CR-23_CRT_Adapter.pdf

 

[modessitt]

I paid $2.25 + $13 shipping for my 467 off E-Bay. Works fine. Came with the same adapters you have. I built my own CR-23 and CR-31, and hardly ever use any other than those two...

 

[robgest]

I paid $2.25 + $13 shipping for my 467 off E-Bay. Works fine. Came with the same adapters you have. I built my own CR-23 and CR-31, and hardly ever use any other than those two...

Well who on here can build me a 23 and 31? Or would it run me almost the same price as the machine?

 

[modessitt]

Maybe for both. I think Ken Layton and others will typically sell you one for about $30-35 each (+ shipping)...

 

[KenLayton]

I have ready-to-use CR23 and CR31 adapters I built for $40 each shipped.

 

[tron guy]

Well who on here can build me a 23 and 31? Or would it run me almost the same price as the machine?

I have ready-to-use CR23 and CR31 adapters I built for $40 each shipped.

Dude it's a one time purchase for years of monitor repair/rejuve. No brainer