** UPDATED! **
Price lowered: $650
Still available.
Tons of photos here (and below):
http://johnsarcade.com/klov/big_guns/
Game works 100%! Replaced IC on CPU board, fixed gate issue (as seen in below YouTube Video)
System 11 game.
Come get this out of my garage.
Things done:
New repro opto board
Replaced an IC on the CPU board
Replaced a bad switch or two
Replaced a few targets
Replaced coil sleeves
No battery damage on pcb. New batteries. Clean PCBs and connectors.
Cleaned up with mills wax
Did a quick shop job with rubbers I had on hand.
Replaced nearly 50 bulbs and flashers. All working perfect now.
Touched up some bad solder connections.
Back Glass is perfect
Playfield is decent
Original Mylar. Not too bad.
Some insert wear
Cabinet sides could use the black touched up.
Solid machine
Located near Amherst, MA
CRAPPY iPhone photos: (BETTER PHOTOS AND A VIDEO BELOW!)
Price lowered: $650
Still available.
Tons of photos here (and below):
http://johnsarcade.com/klov/big_guns/
Game works 100%! Replaced IC on CPU board, fixed gate issue (as seen in below YouTube Video)
System 11 game.
Come get this out of my garage.
Things done:
New repro opto board
Replaced an IC on the CPU board
Replaced a bad switch or two
Replaced a few targets
Replaced coil sleeves
No battery damage on pcb. New batteries. Clean PCBs and connectors.
Cleaned up with mills wax
Did a quick shop job with rubbers I had on hand.
Replaced nearly 50 bulbs and flashers. All working perfect now.
Touched up some bad solder connections.
Back Glass is perfect
Playfield is decent
Original Mylar. Not too bad.
Some insert wear
Cabinet sides could use the black touched up.
Solid machine
Located near Amherst, MA
CRAPPY iPhone photos: (BETTER PHOTOS AND A VIDEO BELOW!)
Last edited:
