Big Guns "forcefield" post

dbpbandit

New member
Joined
Apr 21, 2003
Messages
331
Reaction score
2
Location
Oregon
The post on my BG is staying in the up position a lot, like most for the game. It's also doing a lot of popping up and down like it cant find the right position. The switch on the unit seems to test fine, is there another switch or an adjustment I can make?
Thanks.
 
look on the side of the coil, theres a black diamond shaped plastic that sits against a rod coming from the side of the upkicker unit. The rod rides in a diamond shape groove in the black plastic, coming down on one side of the groove, traveling back up the other side. the groove on the up side isnt as deep as the other, so theres a small lip between the 2 in the recessed position, that locks the plunger down. if that lip is worn, the plunger will do exactly what your describing.
No, I dont know where to find one. If you do find one, get me one too;) Im seriously thinking about using some 2 part epoxy and recutting the step
 
Cool, thanks for the info, I'll check it out. If I find one I'll let you know.

-Dave
 
Back
Top Bottom