big buck hunter 2 no signal issue

streetswepa

New member
Joined
Sep 22, 2010
Messages
2
Reaction score
0
Location
Canada
just picked up my buddys big buck hunter 2, and the problem i am having is when i hook everything up, all i get on the monitor is NO SIGNAL IN, tryed the monitor on another jamma board and it worked, any sugestions what to try, the status lights turn on and can hear the hd running, one thing i noticed is the red light near where the hd plugs into the board does not stay on like my golden tee. and status 1 led stays solid lit.
 
thanks i'll keep reading but seems most posts are on the pro series not sportsmans paradise
 
BBHII has a dipswitch on the motherboard for standard rez and medium rez. I had a similar issue with a BBHII where the switch was set to Medium but the monitor was a standard 640X480. As soon as I flipped the dip I got a signal and picture. Good Luck, just something to check.
 
not necroposting for naught here...

anyone have a link for a manual or dip switch readout for this game?
 
If the status 1 led is solid green then you have a board issue or video card failure. Board issue could be damage or loose pins on the large surface mount chips . Ignore the red LEDs, those are for the modem
 
Back
Top Bottom