Best way to switch between non-JAMMA boardsets?

nanoryan

Well-known member
Joined
Jun 5, 2006
Messages
1,337
Reaction score
248
Location
Washington
Hey guys,

I have a Super Off Road and both the standard and track pack boardsets. Eventually I would like to be able to switch between them with the flip of a switch near the coin door.

How is this typically done? Is there a DIY tutorial somewhere or do I need to convert to JAMMA and use a commercially available solution?

Thanks! Ryan
 
I have been working on a similar setup myself... Me and another klover have talked in depth about how and what to do, were planning on building some kits, but the pipedream has stopped and for a one off build its time consuming and expensive. A cheaper alternative might be to make some extension harnesses and just make it so you unplug one and plug the other one in from the coin door. I haven't decided how or what to do with mine, I have an Indy Heat cabinet and it would be cool to have all three games in one cabinet!
 
I have been working on a similar setup myself... Me and another klover have talked in depth about how and what to do, were planning on building some kits, but the pipedream has stopped and for a one off build its time consuming and expensive. A cheaper alternative might be to make some extension harnesses and just make it so you unplug one and plug the other one in from the coin door. I haven't decided how or what to do with mine, I have an Indy Heat cabinet and it would be cool to have all three games in one cabinet!

Thanks Karl! Hmm, maybe I will think about wiring up some JAMMA adapters and using a MultiJAMMA.
 
Back
Top Bottom