Berzerk Power connector order

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
There are 4 headers on the PCB connected to the slide-out drawer and 3 plugs from the power supply harness. Is it the 2nd from the bottom header that gets skipped, or the second from the top? All plugs are the same size as well?
 
I need to the know the same info.

Can anybody with a Berzerk cab take a nice photo of the small filter board with the connections, so I can make the right connections on my cab?
 
Second from the top is left open. That's for the cocktail version.

The manual has that drawn too...

web.jpg


Actually the top position is two connectors, one with 2 pins and the rest the larger connector, that is on the PCB side. Not sure about the cab-side.

The other connectors are sized the same but everything is keyed (or should be !) so you can't mix them up.

Posting this 2 hours into the new year (here), I must be nuts :)

Happy 2010 to everybody !
 
Last edited:
Second from the top is left open. That's for the cocktail version.

The manual has that drawn too...

web.jpg


Actually the top position is two connectors, one with 2 pins and the rest the larger connector, that is on the PCB side. Not sure about the cab-side.

The other connectors are sized the same but everything is keyed (or should be !) so you can't mix them up.

Posting this 2 hours into the new year (here), I must be nuts :)

Happy 2010 to everybody !

I needed the order for the connectors on the right in your pic. I already have the ones on the left installed. Thanks Andre, that pic was what I needed.
 
Back
Top Bottom