Before I pull the chassis on this one, have a look and lemme know what you think

richiewoo

New member
Joined
May 21, 2010
Messages
253
Reaction score
5
Location
Douglassville, Pennsylvania
Before I pull the chassis on this one, have a look and lemme know what you think

The monitor doesn't fill the screen as seen in the pics and the top is off as well. The size adjustment is maxed out, so it's not that. I am going to pull the chassis and inspect everything and probably do the cap kit, but maybe if you have seen this, you can give me a starting point?

I appreciate it! Thanks!
 

Attachments

  • Arcade 001.jpg
    Arcade 001.jpg
    90 KB · Views: 30
  • Arcade 002.jpg
    Arcade 002.jpg
    94.6 KB · Views: 30
You may also want to check the remote board carefully to see if any of the pots are cracked. Chances are thats a K7000 in there.

ALSO - if you get a cap kit from Bob Roberts, tell him its for a Neo Geo. it will include a tantulum capacitor specific to Neo Geos.

Jeff
 
If this is an older NeoTec monitor, also, check transistor Q201/Q202....and as already mentioned...do a cap kit.

Edward
 
Back
Top Bottom