Because i am lazy

THEDJ

New member
Joined
Oct 20, 2008
Messages
520
Reaction score
4
Location
SOUTHPORT, Indiana
I have a frogger arcade and the original power that was inside is doa.

I was going to just convert it to a switcher

Anybody have a link on doing this or even a picture of the wires and what goes where.

Mine is the 36 pin connector style.

thanks
chris
 
Seems simple enough.

Wire up ac power to switcher.

Green = Earth Ground
White = Nuetral
Black = Hot

Wire switcher to 36 pin connector
A= Solder Side
B= Parts Side

Then run a wire from +5 to A18 and B18
Then run a wire from Ground/Return to A16 A17 B16 B17
Then run a wire from -5 to A1
Then run a wire from +12 to B1

Now get off your lazy butt.
 
Back
Top Bottom