BBH - schematics

snapJaw

New member
Joined
Oct 14, 2010
Messages
182
Reaction score
0
Location
Michigan
Does anyone have the schematics or manual for the original big buck hunter or know where I can get them?

I have a non-working PCB with a fried part (L52) and I'd love to see what else might have been taken out. I called Incredible Technologies and they were no help - basically said they don't have that manual/schematic and whatever is on the website is what they have.

I figured I'd ask here next. Thanks in advance.

(FYI - the tech on the line told me I might be lucky and to just take out L52 and solder a wire between the two traces and the gun should work again. This sounds a little fishy, but I guess I'll give it a try if I can't find part numbers)
 
I've had no luck on the schematics, however:

L52 seems to test fine. C522 is bad, however. Does anyone happen to know this value? It is burnt up pretty bad.

Thanks in advance!

(This is an Incredible Technologies 2011 Rev. 7 board)
 
I have an original buck hunter as well. I will see what the value on c522 is and get back. Also looking for a manual, as mine isn't coining or starting.
 
Back
Top Bottom