battlezone pcb plugged into asteroids cab, ? result?

r5g

Active member
Joined
Sep 26, 2005
Messages
3,833
Reaction score
14
Location
Nevada
battlezone pcb plugged into asteroids cab, ? result?

went over to a sellers house last nite, he sold me a asteroids ur anyway he also says
"i have an extra pcb to throw in with the deal if i can get a bit more $$ , so then he puts in the battlezone pcb to asteroids, (no aux pcb with it) he thinks its a asteroids pcb, i just did not pay to much attention i was just watching him and did not notice the slight difference in pcb board, anyway he puts it in, there is a slight pop noise and tiny smoke on pcb, i unplugged game quick, and then noticed it was bzone pcb. what would be outcome of this?

the asteroids did boot up and play after this

as i aside not i now have a dead bzone pcb f/s too lol 50 shipped
 
Last edited:
At a minimum this will fry some of the voltage regulators....don't ask how I know this :)
 
bz

the crackle and smoke came from v reg area, but there is no visable burnt part showing
 
Ouch!
GND fed into Pins 1 & A (poss burns out a track)
36VAC fed into 20 and X (This is the worst one I think)

Ast_vs_BZ_Pins.jpg
 
Ouch!
GND fed into Pins 1 & A (poss burns out a track)
36VAC fed into 20 and X (This is the worst one I think)

Ast_vs_BZ_Pins.jpg

Yep, that +12, probably is the audio amp, killed in the bzone.

It is showing 19, 10, 21< is that what you are seeing also.
 
Back
Top Bottom