Battlezone CP bezel screw size/length

Zinfer

Well-known member
Joined
Apr 19, 2008
Messages
4,497
Reaction score
32
Location
Lima, Ohio
So, being I can't seem to locate anyone that runs Battlezone CPO's, I am just going to throw the assembly back together and perhaps someday something will come along.
I was about to secure the Battlezone Control Panel bezel to the Control Panel housing and there were no threads on the bezel, so before I made a mistake, I looked this up in the manual. I wanted to be certain I was using the correct size, thread and length screw.
I was surprised to find that the screws didn't even have a part number or description.
Does anyone know the correct screws to use before I go and crack these brittle bezels?
Thanks in advance.
 
bump - noone knows the screw size for the bezels?
Also, I took another look at the Control Panel before putting it back into place. It was really starting to rust badly so I put it in the bead-blaster and blew off all the old screenprinting. This thing was badly pitting to the rust. Going to prime and paint, may throw on some bondo for the pitting.
 
Top 3 are 10-24 x 1 1/4" button head socket
Bottom are 10-32 x 1" button head socket
These are for the Bezel plates that's what you are looking for correct?
 
Last edited:
Ehm I don't think so. here's a graphic of the screw size I am looking for:
 

Attachments

  • screwsize.jpg
    screwsize.jpg
    100.4 KB · Views: 10
Oh the Joystick Bezel screws.

10-24 x 1" self tapping Phillips head

I would probably use one with an actual bolt head though. It would be easier to put in.

fmp-229-1108.jpg
 
Last edited:
Ah, thank you kindly Sir. I'll see if I can come up with some of those.
 
Back
Top Bottom