FS Parts: Bartop cabinet for 60 - 1 new, and a bunch of em! $99.00

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
Rating - 100%
86   0   0
Bartop cabinet for 60 - 1 new, and a bunch of em! $99.00

Well, i'm sure most of you saw this tragedy - http://forums.arcade-museum.com/showthread.php?t=236652

I have no choice but to cut up all these sheets of white. I need to use 10 sheets for cabinets ordered. I guess i will cut out the 5 cabs i need for myself that i really don't need right now lol. That leaves 20 sheets, so i will cut out some quantums, black widows, agent X's a starcastle, whatever i can to just burn through it and hope someone orders those cabs later.

There's extra room on these white sheets for some smaller parts, etc. I have done a few bartop cabs i designed for 60 - 1 use. This fits a HansG 4:3 aspect Lcd, an ATX power supply, speaker, joystick, 4 buttons, and an Atari style trackball when used with a metal mounting plate. You'll get the cabinet, and unpopulated control panel. the only hardware needed to complete the actual cabinet is T-molding, stick on feet or a lazy susan type turntable, a piece of lexan for the front, and 1 door lock. You'll need the monitor, board, stick, buttons, trackball, harness, power supply etc to complete the game. This picture was from RTurbo on here, he finished this one out, and added the overlay. Since i am doing these in white instead of black, Price will be 99.00 + shipping, assembled. I can't even get to the black to do any in black. This is a one time deal on these for price, max number of these offered is 20. Black ones will be 149.00 Pm me any questions, thanks! Brett
Also - dimensions within 3/4" it's roughly 22X22X22"
DSC01181.jpg

countertop-1.jpg
 
Last edited:
i will have one done and boxed up for mid week, and PM everyone total shipped, thanks!
 
Hmm. Very interested. Is the control layout standard for you or can I customize (and is it extra) or perhaps even leave blank and I'll drill that. Can you post pics in white?
 
i have Zinfer coming up tomorrow to help me move some of this material around. It's shifted inward so i can close the door, but i can't run the machine till it's out of the way. I will be cutting up white tomorrow, so i'll have a picture soon, and shipping prices soon. Way to busy to get into much custom stuff at the moment. I'll throw a blank panel in with yours along with the original panel for an extra 5.00 so you can use either if that works. thanks!
 
Looks cool, Cmndr Brain made something similar for himself, and cut triangle holes on the front that look cool but also double a great handles.

Maybe he will post a photo here.
 
If you cut a Star Castle, I'll almost certainly order one when I order a couple Warlords cocktails from you sometime after the metal kits get done. My Star castle can needs to go in the trash. Already ordered the side art and cpo. :)

Any luck finding a local double dragon yet? :)
 
no luck on DD but i do make star castle! PM me for my address, and mail me 18 feet of Pica vinyl! i'll install it on the Star castle for free before assembly, so it matches factory. SC is 350.00 and they look nice all done. I still need for someone to draw me a diagram of the control panel, for measurements and hole placement. I don't have the CP programmed for it.
 
Bump - update. I am going to have to order boxes to ship these. I am getting 25X25X25 boxes, weight packaged is 47 pounds. The plan is to wrap the bartop in cardboard, wrap in heavy bubble wrap (the big bubbles) and then put it in the box. So double boxed should work. I am also insuring all these for 200.00 each, with the boxes, wrap etc it's going to be a bit more than 99.00 once it's ready to ship. Price is still 99.00 + shipping. I will pay for the boxes out of pocket, and the bubble wrap as well.

I am on my way to get quotes now, as long as i don't get the idiot woman there that screws up the quotes every time (she's off anywere from 5 - 25% on the price) and never in my favor lol. I will start Pm'ing everyone.. i have one built, and can build the rest while the boxes are on the way, i'm ordering them today. Here's the list i have so far :

Brmoor 1 or 2
Kretter 1 or 2
Robgest 2
treborlicec 1
need help 1
firefgtn8 1
oryk zinyo 2
fast-ed 1
warp9pinball 1
rewrite 1


total 15 - 19 bartops.

I am ordering 20 boxes, so depending on who orders (shipping price considered) i may have 1 left available. PM's coming in about an hour, thanks! Brett
 
Last edited:
I am on my way to get quotes now, as long as i don't get the idiot woman there that screws up the quotes every time (she's off anywere from 5 - 25% on the price) and never in my favor lol.

Who are you trying to ship these through? Why don't you just ship these FedEx or UPS?
 
These are going UPS. I have 15 - 19 of these to ship, and if i take in 1 with the zipcodes to check shipping.. if she's off by 3.00 on each one, times that by 19. lotta money to lose!

The kick in the balls is now the boxes. they are 3.77 each. They will only ship them motor carrier. I just looked all over hell, and i can't find a box that size locally, and the only other place that carries that size, the boxes are 8.00+ and shipping on top of that. SO, i just checked to see shipping on the boxes. I'm getting 20 boxes, and 107.00 for shipping, so i'll have 9.00 in just the boxes, and then i still have to go buy bubble wrap and tape. i'll have 20.00 in packaging alone in these. Maybe everyone will be nice and throw me 5.00 towards packing materials to make this worth it! :D
 
pics of this front back and inside for a completely white one would be cool... without any hole drilled on the control panel so i can do my own layout and shucks. Shipping to 08003? ;)
 
little late, i just got back from getting prices! I have one that goes to 04002, has to be the same zone as you, shipping is 70.00

Here's what i have -

name zip total shipped total shipped for 2



Brmoor 1 or 2 60517 159.69 319.38

Kretter 1 or 2 55044 161.85 323.70

Robgest 2 49091 162.67 325.34

treborlicec 1 47172 159.69

need help 1 46237 159.69

firefgtn8 1 43016 159.39

oryk zinyo 2 98311 183.84 367.68

fast-ed 1 63664 165.37


warp9pinball 1 53405 159.69

rewrite 1 04002 169.80


These are essentially like shipping a monitor. More than a 19" but less than a 25"
Above are the totals. Here's where it gets tricky. I understand the shipping is high, and to get 20 boxes here it's 107.00 in shipping. If i only order in 10 boxes, i still have to pay 107.00 So, if at least 10 of you take them assembled at the prices above it's a go. The only other alternative, is that i ship them flat, and you guys assemble them at home. It's just as much work either way for me, and i'll have to make a quick instruction quide for assembly, and include screws, the strips, etc so you can put them together with a screwdriver / screwgun. I'll send PM's out with a link to this, reply back with:

I'll take 1 (or two) shipped as quoted
I'd rather take one flat packed to save on shipping
I'll pass.

You won't hurt my feelings, but let me know asap so i can see what i need to do, thanks guys!
 
Last edited:
I haven't showed any interest yet but I am curious, it looks like you offered it as an option to have this shipped unassembled?

any idea how much less shipping is for this option?
 
Back
Top Bottom