Bartop Cabinet Dimensions

Vectordreams

Active member

Donor 6 years: 2020-2025
Joined
Jan 22, 2017
Messages
411
Reaction score
208
Location
Colorado Springs, Colorado
I am looking to see if anyone has dimensions of the SNK Playmore Hanaho bartop cabinet. I am thinking of making a custom cabinet and just trying to get some ideas for a bartop cabinet for a 13 inch CRT. I found the picture below and see these were made back in 2006.

1740018965798.jpeg
 
There was one of these done for a CinemultiVector.

Here is a whole thread on the topic!

 
I have the countertop taito gameroom classics one.

What measurements do you need?
 

Attachments

  • 20250219_224314.jpg
    20250219_224314.jpg
    456.2 KB · Views: 5
  • 20250219_224543.jpg
    20250219_224543.jpg
    448.4 KB · Views: 5
@osver If I can get the dimensions based on where I have the white lines that would be great. Also need the cabinet width. I am have contacted a cabinet maker and need a general size for them to give me a quote.
1740057270699.png
 
@osver If I can get the dimensions based on where I have the white lines that would be great. Also need the cabinet width. I am have contacted a cabinet maker and need a general size for them to give me a quote.

Here you go. Measurements into rounded corners may be slightly off...

HAHANO1.png
 
And for the CP
 

Attachments

  • 20250220_090251.jpg
    20250220_090251.jpg
    602.5 KB · Views: 7
  • 20250220_090243.jpg
    20250220_090243.jpg
    518.4 KB · Views: 7
  • 20250220_090632.jpg
    20250220_090632.jpg
    600.2 KB · Views: 7
Back
Top Bottom