rknucklez
Active member
My good buddy Lloyd from Coin Op Warehouse sold me this rarity,
a Bally Sente Cocktail "Hat Trick"
It is solid but needs a complete overhaul. I chose to start with the Control Panels.
*
*
*
Both were worn on the bends with some odd wrapping paper glued on and plexi shields.
Being it was so hot here in NJ today I decided to work with the heat gun. I stripped, sanded, Brillowed and buffed the Red Player side first.
*
*
*
*
*
*
Yesterday, I scanned and vectorized the entire cp the best I could with what was left of the art on both panels. My program of choice is Adobe Illustrator CS
*
*
*
*
*
a Bally Sente Cocktail "Hat Trick"
It is solid but needs a complete overhaul. I chose to start with the Control Panels.
*
*
*
Both were worn on the bends with some odd wrapping paper glued on and plexi shields.
Being it was so hot here in NJ today I decided to work with the heat gun. I stripped, sanded, Brillowed and buffed the Red Player side first.
*
*
*
*
*
*
Yesterday, I scanned and vectorized the entire cp the best I could with what was left of the art on both panels. My program of choice is Adobe Illustrator CS
*
*
*
*
*

