Bally Midway Power Switch

gavinyuill

New member
Joined
Feb 4, 2010
Messages
30
Reaction score
3
Location
NSW, Australia
Hi Guys,

Anyone know of a source for the metal push button power switches used on Bally midway cabs? I need one to finish my Pacman off.
 
I spent hours on the internet (literally) looking for these and didn't find anything. I even searched by the UL# / specs etched onto the piece but nothing turned up. There is one the looks very similar, but instead of having the quick connect tabs they have wire leads used to splice into the power and were for lamps or appliance fixtures. They also sell these at Home Depot or Lowes, I forget which one. But no exact matches. I ended up buting a toggle from Bob Roberts.
 
How is this one? You would have to solder the wires on to it.


http://www.allelectronics.com/make-a-store/item/PB-173/SPDT-ON/OFF-PUSHBUTTON-SWITCH/1.html
150x150-8790.Jpg
 
I picked up one like this i86time mentioned from home depot. I had to solder the wires together, but it looks and feels exactly right. The body is plastic rather than metal, but you would have to look extremely closely to notice.
 

Attachments

  • 3490125402p.jpg
    3490125402p.jpg
    12.5 KB · Views: 44
I picked up one like this i86time mentioned from home depot. I had to solder the wires together, but it looks and feels exactly right. The body is plastic rather than metal, but you would have to look extremely closely to notice.

I couldn't find exactly that on the Home Depot site right now, but I did find this on Amazon: http://www.amazon.com/gp/product/B000LNNUYO/ref=pd_1ctyhuc__sbs_01_01

It's the most similar looking thing I can find to replace the one on my Frogger cab.
 
Back
Top Bottom