Bally Eight Ball Deluxe- Ball Return solenoid does not have power to push ball

dz0k52

New member
Joined
Dec 2, 2012
Messages
3
Reaction score
0
Location
Ontario, Canada
Bally Eight Ball Deluxe- Ball Return solenoid does not have power to push ball

I have been trying with no luck to repair my eight ball deluxe ball return. When the game is first turned on it works fine. After a few minutes, when the ball goes down, the ball return pusher does not have enough power to send the ball to the pin, it keeps trying over and over but only pushes the ball a couple of inches.
Whats been done:
1) new solenoid coil
2) new solenoid expander board
3) rebuilt lamp driver board.
I should also note when the machine goes into test mode and the lamps flash on and off, they flash dimmly and there is a buzzing sound rather than a sharp click when the lights come on/ Might be irrelevant ???
What am I missing????
 
Resoldered the header pins of all the connectors on the solenoid driver board? Same with the solenoid expander board under the playfield next to the flippers?
 
Back
Top Bottom