Bally 5000 plus slot help

drfreeze1739

New member
Joined
Jan 15, 2012
Messages
4
Reaction score
0
Location
Fullerton, California
Hello

I have a bally 5000 plus and when i power it on all it dose is show 888888 in all the lcds

The florecent light light up and thats it.

I have tryed to do a safeclear ram on it by pulling out the I/O board and leaving the ribbon cable pluged in and pressing the coin button while i turn it on.... But the only thing that happends when i do this is the reel shake a little and that it.....

I have replaced the battery and checked all the fues and plugs...

Any help would be great....
 
Hello

I have a bally 5000 plus and when i power it on all it dose is show 888888 in all the lcds

The florecent light light up and thats it.

I have tryed to do a safeclear ram on it by pulling out the I/O board and leaving the ribbon cable pluged in and pressing the coin button while i turn it on.... But the only thing that happends when i do this is the reel shake a little and that it.....

I have replaced the battery and checked all the fues and plugs...

Any help would be great....

Check the 5 volts on your power supply. It should be between 5.1 and 5.2 volts DC. but no lower or higher.

Dave
COINOPSHOP
 
Back
Top Bottom