MMAO - Game: Baby Pacman project in Philly, PA

scottmaggie

Well-known member

Donor 4 years: 2011-2013, 2024
Joined
Jun 8, 2011
Messages
2,773
Reaction score
77
Location
Philadelphia, Pennsylvania
Rating - 100%
158   0   0
Picked this up yesterday and already have one. Cabinet is nice & solid except for the 2 weird lockdown bar marks by the control panel.

Playfield needs overlay badly (& rubber & balls)
<$120 playfield decal at phoenix arcade, $12 for rubber & balls from any dealer>

Vidiot is tested working, Solenoid board is tested working
<best part next to the cabinet being good>

MPU has battery damage & needs repair. I did some clean up and installed a lithium battery with blocking diode.
<should be fixable though no promises, I have a working one for $100 if you want it>

Marquee is flaked off and was taped from behind with clear packing tape.
<$40 printed ones online>

I am asking $350 for this.

I think that is reasonable considering all you are getting. I don't want to part it but would get at least that if sold in pieces. Hopefully one of you will save this baby... pun intended.

I'd like it out this week...
 

Attachments

  • bp (1).jpg
    bp (1).jpg
    96.5 KB · Views: 51
  • bp (2).jpg
    bp (2).jpg
    94.4 KB · Views: 68
  • bp (3).jpg
    bp (3).jpg
    97.2 KB · Views: 54
  • bp (4).jpg
    bp (4).jpg
    98.8 KB · Views: 57
  • bp (5).jpg
    bp (5).jpg
    99.2 KB · Views: 63
Last edited:
more photos

Also for sale Bally Midnight Marauders (see other ad)

And a Taito Gameroom Classics upright cab - empty cab.
 

Attachments

  • bp (6).jpg
    bp (6).jpg
    97.3 KB · Views: 37
  • mm (7).jpg
    mm (7).jpg
    97.7 KB · Views: 34
  • bp (8).jpg
    bp (8).jpg
    106.9 KB · Views: 27
  • bp (9).jpg
    bp (9).jpg
    95.3 KB · Views: 26
update

I just fixed a 133 mpu so add $100 if you want it with the baby pacman... With the working MPU installed the game coins up and plays. Screen is dead so with a working MPU you are half way home.

Also I goofed on one of the photos above..it from midnight marauders. Attached is the pic I meant to upload.
 

Attachments

  • bp (7).jpg
    bp (7).jpg
    102.7 KB · Views: 21
Last edited:
I think it's the amount of work this needs to be restored.PF overlays are not for the average collector .
 
baby pacman...

Colehvac1:
Yea I get that on the playfield overlay for a full game but on baby pacman it's a pretty easy job.

Tornadoboy:
I could get it to NYC if that helps you...
 
Colehvac1:
Yea I get that on the playfield overlay for a full game but on baby pacman it's a pretty easy job.

Tornadoboy:
I could get it to NYC if that helps you...

Ugh, you're KILLING me! For the sake of basic sanity I have to pass though, I already don't have the room for the games I have and have enough projects to keep me busy until the next millenium, not to mention I don't have a vehicle ready to move it in one piece.

<Must...not...buy...game......> :(

Unless you can drive it here and take some games in trade? :D
 
Last edited:
ok time to part it...

Since no one seems to want the whole cab...

MPU 133 working 100% $120
MPU 133 flashes correctly but not working $60
MPU 133 missing 2 chips, non working $40
Vidiot working $120
Solenoid/Driver working $100
Power Supply $75
Bezel in great shape $100 (pick up only)
Marquee badly flaking $10
Playfield complete but badly flaking $100 (or ask for specific parts ie: plastics)
Harness complete $30
Coin door $25
Control panel complete $40
Monitor w brackets & smoked plex (dead) $70 (pick up only)
Anything else just ask.

Take the whole game for $350 w a nonworking MPU or $450 with a working MPU.

Prices negotiable and do not include shipping.
 
Back
Top Bottom