Baby Pacman Energizer "2" row.

iyouwas

Member
Joined
Nov 28, 2010
Messages
925
Reaction score
3
Location
Pittsburgh, Pennsylvania
Hi all,
When I hit the second drop target from the left on the pinball playfield, the one that lights the second set of the letters that spell "PACMAN" nothing happens. The other 3 work just fine.
The lights are not burned out, they just wont activate.
Any idea why?
Thanks!
 
Last edited:
See if the switches on that drop target are working properly and for broken wires would be the first step. Use the other drop target switches as a guide for how they work properly. Only adjust one thing at a time to see if it fixes it. BPM can be really sensitive. I smashed some drop target switches on mine by accidently bumping the lock bar and it caused all sorts of problems.
 
Do the lamps work in the lamp test?

If the #2 drop target switch IS registering, it should immediately reset the bank after its been hit and falls.
 
Is this a hard adjustment for a beginner just getting into pinball?

Not at all. Make sure the leaf switch is open when the drop target is up, and make sure that the switch closes when the target goes down. If you open up the back door (with the playfield in place) you can get to the switches on the drop targets.
 
Back
Top Bottom