Baby Pacman Drop target springs

morphis72

Member
Joined
Nov 25, 2013
Messages
691
Reaction score
2
Location
Raleigh, North Carolina
Can anyone tell me what size to buy or where to get new springs for my baby pacman drop target assembly?

I have removed it, cleaned it, ordered a new target set and put it all back together. Two of my targets were not dropping like they should and if I swap the springs around the problem follows the springs.

I have done some digging but can't seem to find anything identifying the spring. The springs on my Bally Star Trek pin are quite a bit longer so I know these things are not one size fits all.
 
Last edited:
I usually buy 20 or more of them at a time since they work on various drop targets and flipper returns as well. I find that more times than not you will need to replace all of the drop target springs. Over the years people "tweak" them and they need to be just right to function reliably. New coil sleeves are cheap insurance too.
 
I usually buy 20 or more of them at a time since they work on various drop targets and flipper returns as well. I find that more times than not you will need to replace all of the drop target springs. Over the years people "tweak" them and they need to be just right to function reliably. New coil sleeves are cheap insurance too.

Just an FYI -- Those springs were a dead on match. Thanks!!!
 
Back
Top Bottom