Baby Pac-Man Problems ...

kentmurphy

Well-known member
Joined
Mar 7, 2008
Messages
1,744
Reaction score
197
Location
Missouri
So I picked up a Baby Pac-Man today. The video game plays fine, but when you go down the escape hatches nothing happens. All the lamps on the playfield appear to be lit and working properly. During the self-test none of the solenoids are activated. I haven't done much research yet, but I was wondering if someone could point me in the right direction.

Thanks
 
IIRC there is a fuse under the playfield for the coils. Check that its not blown, and that there is voltage supplied to the playfield when the coils are supposed to work.

There is also a relay on the driver board that should click when the game enables the flippers.
 
Back
Top Bottom