Baby Pac Flipper Wiring Help

gutz

Well-known member

Donor 2024
Joined
Feb 2, 2010
Messages
4,342
Reaction score
755
Location
Garretson, South Dakota
Total pin newbie. Maybe its best to clench your teeth and press your tongue to the roof of your mouth before reading on :)

Picked up a baby pac that had wiring hacks in the cp and playfield. Sorted through the control panel wires and figured it out from the schematics in the manual. As for the playfield, the flipper soleniod wires were hacked. For the left flipper, I have 3 cut wires (1 Green, and 2 Brown) and the right flipper has 2 cut wires (1 Orange and 1 brown). I've looked at a picture of the playfield (marvin's site) and through the schematics and this is my interpretation poorly drawn in paint: SEE ATTACHED The wire colors correspond to what is hacked.

Can someone confirm this? I'm not 100% confident on the wiring.
 

Attachments

  • baby pac flippers.jpg
    baby pac flippers.jpg
    27.7 KB · Views: 11
I took some pics of mine for another fella on here. Should be what you need.

start with this pic and go to the right. Lots of pics of the flippers.

http://www.flickr.com/photos/beerorkid/4257896535/in/set-72157607200160470/

4258667400_2776ecaf76_z.jpg


4257902317_ff54053736_z.jpg


4258661382_bb742f46b0_z.jpg


4257899441_7d5ea73ea7_z.jpg


I gotta go finish dinner and will compare your awesome drawing and can take more pics of anything you want if you need.

I think 50% of my posts are about BPM >.<
You realize this game is annoying as hell right ;)
 
Awesome, thank you thank you. That is exactly what I needed! I think I have the wiring correct now. I will get that done this weekend.

A pain in the ass you say :)? I've powered it on once (to get a reference point before any repairs) and the right kickout hole solenoid is constantly firing. Let the fun begin!
 
Back
Top Bottom