So I just bought a B&K tester/rejuv and it's missing #31. So I decided to make one.. But I can't figure out where to solder on the G1 blue and green, and the G2 blue and green.
I'm using this document:
http://www.hammerco.com/arcade/Schematics/bk-cr31.jpg
What am I missing?
Using a neck socket from a burnt up k7000 and cracked open a B&K adapter with the same molex pinout..
Thanks for any help..
I'm using this document:
http://www.hammerco.com/arcade/Schematics/bk-cr31.jpg
What am I missing?
Using a neck socket from a burnt up k7000 and cracked open a B&K adapter with the same molex pinout..
Thanks for any help..
