B&K 466 owners, I need your help.

[racer2e]

I see. I just bought my 466 and it won't be here until Monday or Tuesday. I thought I had read somewhere that the old adapter b&k used to make had the switch in it. That's good news.
On a side note, the guy I bought this from on eBay refunded 20 dollars to me, after I paid, because the shipping was way less than he had quoted on the auction. Crazy.
Jayme

 

[KenLayton]

The adapter with a switch is for the model 465 which came out before the 466.

On a 466 you simply follow the instructions in that setup document and chop off the round connector. Then you crimp on Molex pins and insert them into the rectangular Molex housing to use the modern CR adapters.

 

[racer2e]

Thanks Ken, I thought I had read something about that. I'll probably send bob an email, but I see there are still some adapters for the 466 available cheap but they are lettered instead of numbered so I don't know is one will work with a cr23 style tube. I guess I should wait and see if the documentation tells me.
Jayme