Aztarac Radar button location

jetusenet

Well-known member

Donor 4 years: 2011, 2013-2014, 2024
Joined
Feb 26, 2006
Messages
7,237
Reaction score
743
Location
Staten Island, New York
Hi;
Calling all AZTARAC owners, I need your assistance please.........

I am restoring an original Aztarac CP, which has a total of 64 holes, (was converted several times) and need to know the actual location of the Radar button hole.

If you check out the pic attached, you can see that there are three holes overlapping each other where the button should be located. I think it is the middle one but in the off chance that I actually get my hands on an Aztarac CPO in the future, I want everything to line up correctly.

If you could please help me by taking measurements from the edges of the CP to the center of the Radar button, if would help me tremendously, (and would be greatly appreciated as well).

If you want to check out my restoration:
http://www.coinopspace.com/forum/topics/aztarac-it-lives?xg_source=activity

Thanks
Jeff
 

Attachments

  • Stripped.jpg
    Stripped.jpg
    85.5 KB · Views: 12
here is a good photo.. You can probably use the grid of the overlay to map out position. You can use the carriage bolt holes on your panel for refrence.

aztarac.png
 
Hey!
That pic looks familar.......

That's a good one. I blew it up and I just might be able to extrapolate the hole location using a custom matrix.

Thanks for the help.
Jeff
 
Back
Top Bottom