Wolfinator
Well-known member
My bezel is flaking pretty good, so I'm working on a decal that will stick to the underside of the glass and give the same look as the original screened bezel.
I printed the artwork backwards on clear vinyl, stuck it to the glass, and added white vinyl behind the clear just to add some contrast.
This pic shows my small prototype with the color matched close to what mine would have been when it was new. I will eventually add a cutline where the monitor goes, eliminating the entire black square....
I printed the artwork backwards on clear vinyl, stuck it to the glass, and added white vinyl behind the clear just to add some contrast.
This pic shows my small prototype with the color matched close to what mine would have been when it was new. I will eventually add a cutline where the monitor goes, eliminating the entire black square....