Atari/Williams Coin Door Inserts

ThisOldGame

Well-known member
Joined
Mar 3, 2007
Messages
4,722
Reaction score
609
Location
Fairfield, Iowa
I always thought these were are cheap paper inserts.
While tearing down my defender coin door last week prepping for my MW convert
I discovered these were made from a piece of white polycarbonate translit material.
So I thought I do test print on the same material to check it out.
they turned out great and backlight beauty. The black is completly opaque and much better than some of the other orginal papers or DIY inserts-IMO

IMG_4579.jpg

Any interest in printing more and adding them to the site??
how would you like to see them grouped for sale or are there other variations
I could add to the print sheet?

and yes those MWs are custom :D
 
I always thought these were are cheap paper inserts.
While tearing down my defender coin door last week prepping for my MW convert
I discovered these were made from a piece of white polycarbonate translit material.
So I thought I do test print on the same material to check it out.
they turned out great and backlight beauty. The black is completly opaque and much better than some of the other orginal papers or DIY inserts-IMO

IMG_4579.jpg

Any interest in printing more and adding them to the site??
how would you like to see them grouped for sale or are there other variations
I could add to the print sheet?

and yes those MWs are custom :D


I'd be in. I'd also be in for some of that transparent stock you've got there. Do you have any that works with ink jet printers? Or do they sell that stuff somewhere? Let me know. Maybe you could ship it to me along with my Multi-Pac CPO, or my Shark Attack Side art. Thanks Rich.
 
Originals are still readily available from pin suppliers like Pinball Resource and Marco Specialties.
I've made custom ones by printing on vellum with a laser printer. They come out great.
 
I printed out ones for my pole position and I thought they looked great. Shows how good of an eye I have! :)
 
Forgot about the exidy any one got a pic or could scan one so I can vector?
Id assume theyre the same size so I can work those into the sheet print

Dont think I mentioned this above but these are screenprinted
the translite is a thin poly milky white simualr to white plex that back lights in lightboxes
so illuminates far better than any paper or vellum
 
Wanna bring one over on Wednesday for me to compare? I'm curious to see if my standards are just way too low. :D
 
But of course Mr Phet send me your file Ill do a new screen anyways to add on the exidy versions, are these the same size as the standard inserts??

I meant the song tags, not the coin inserts. That'd be a lot of screenin' but man would it look cool lit from below.
 
I'd be interested in some. We can always add to my order! Atari, Williams, Exidy mix. Perfect. Restoring a few of each right now too! :D
 
I would buy some!! I would like to use the ones with the atari logo in all my atari machines. Can you also make the Atari coin door sticker that goes in the center of the door?
 
Back
Top Bottom