Atari System 1 Questions (Speakers and Joystick)

RILaw

Active member

Donor 2013, 2015
Joined
Nov 3, 2010
Messages
680
Reaction score
135
Location
Rhode Island
Gave up, ordered these: https://www.amazon.com/Goldwood-Sou...51158005&sr=8-11#averageCustomerReviewsAnchor

(Still looking for a source or at least the correct size of the roll pins)

First stupid question, every manual I could find for Atari System 1 cabinets lists the speakers used as 4.5" 8 ohm round speakers, but I have seen a few people mention they have 4 ohm speakers in their cabs. I have 4 ohm in mine, just trying to figure out if they are 4.5", 5", or 5.25"? (It's different each way I measure (across, diagonal from edge to edge, or diagonal from hole to hole), so which is correct?

Second question, where can I get new roll pins for the Atari 8 way joystick? The little one on the end came out in two pieces when I installed it on the cp.

Thanks
 

Attachments

  • 20250628_112307.jpg
    20250628_112307.jpg
    608.7 KB · Views: 1
  • 20250628_112345.jpg
    20250628_112345.jpg
    594.8 KB · Views: 1
  • 20250628_112407.jpg
    20250628_112407.jpg
    738.6 KB · Views: 1
  • 20250628_112323.jpg
    20250628_112323.jpg
    723.8 KB · Views: 1
Last edited:
Back
Top Bottom