Atari Sys2 - DC p/s - Can I replace a...

joeycuda

Well-known member
Joined
Aug 17, 2009
Messages
14,522
Reaction score
990
Location
Madison, Alabama
Paperboy, Atari Sys 2, DC p/s mounted on upper side of cabinet

I'd like to recap it for the heck of it. Can I replace a

10,000uf 16v cap with a 12,000uf 25v that GPE carries? Would that affect the voltage output (need to readjust pot)?

Trying to put an order together.. thanks in advance for any help!!
 
It's not clear exactly where you are talking about to be 100% sure, but I don't think it would be a problem. If it is on the output of a regulator I'd use low esr caps.
 
It's not clear exactly where you are talking about to be 100% sure, but I don't think it would be a problem. If it is on the output of a regulator I'd use low esr caps.

Thanks. I'm not absolutely sure of its function. Just checked Mouser and the 10k uf if a no go there, so I'll probably try the sub.
 
Back
Top Bottom