Jango8
New member
Atari Star Wars Cockpit - Rear Panel Measurements Needed
Hi All,
I am looking to have the 2 x rear chipboard access panels on my Atari Star Wars cockpit cut via CNC. These are missing from my machine and I need to fabricate these
There is an Autocad file floating around detailing the measurements of an Atari Star Wars Cockpit, however the rear panels depicted in this file is not correct.
Here's the details:
http://www.classicarcadecabinets.com/star-wars-cockpit.html
For example, the rear top access panel depicted in the autocad file does not detail the metal rectangular air vent slot at all.
The rear bottom smaller access panel (that has the cylinder lock) depicted in the autocad file does not detail the slim rectangular cut in the timber that acts as another air vent.
Therefore I am hoping someone here has (or can take) exact measurements of these 2 x rear access panels please, including measurements / location of the cuts / holes needed for the air vents mentioned above please.
Also - does anyone have a scanned image of the Atari game serial number sticker / decal that was on the top rear access panel please or direct me to where these may be.
My serial number sticker / decal was missing (as was the chipboard panel). Is there any other way of identifying the serial number of my machine in the absence of this sticker / decal? Are these details stamped anywhere else on the machine is what I'm, getting at.
Thanks again
Hi All,
I am looking to have the 2 x rear chipboard access panels on my Atari Star Wars cockpit cut via CNC. These are missing from my machine and I need to fabricate these
There is an Autocad file floating around detailing the measurements of an Atari Star Wars Cockpit, however the rear panels depicted in this file is not correct.
Here's the details:
http://www.classicarcadecabinets.com/star-wars-cockpit.html
For example, the rear top access panel depicted in the autocad file does not detail the metal rectangular air vent slot at all.
The rear bottom smaller access panel (that has the cylinder lock) depicted in the autocad file does not detail the slim rectangular cut in the timber that acts as another air vent.
Therefore I am hoping someone here has (or can take) exact measurements of these 2 x rear access panels please, including measurements / location of the cuts / holes needed for the air vents mentioned above please.
Also - does anyone have a scanned image of the Atari game serial number sticker / decal that was on the top rear access panel please or direct me to where these may be.
My serial number sticker / decal was missing (as was the chipboard panel). Is there any other way of identifying the serial number of my machine in the absence of this sticker / decal? Are these details stamped anywhere else on the machine is what I'm, getting at.
Thanks again