Atari Reg 2 Question

TRK

New member
Joined
Jul 4, 2010
Messages
170
Reaction score
0
Location
Bishop, Texas
Resistor 31 does anyone have a value for it please?
Thanks this is in a dig dug version 02 looks like it was there and now missing.
Thanks
 
When you say version 02, I'm assuming you mean the A/R II board rev 02. The resistor should be 22ohm 10watt (may differ depending on the game). The good news is, you don't need it. Since Dig Dug only requires a A/R II rev 01 board, it only uses the power side of the board. The other side, which is mostly for audio amplification, is not used. Therefore you don't need to replace that resistor unless you are going to put it in another game that needs a rev 02 board like Centipede or Battlezone.
 
When you say version 02, I'm assuming you mean the A/R II board rev 02. The resistor should be 22ohm 10watt (may differ depending on the game). The good news is, you don't need it. Since Dig Dug only requires a A/R II rev 01 board, it only uses the power side of the board. The other side, which is mostly for audio amplification, is not used. Therefore you don't need to replace that resistor unless you are going to put it in another game that needs a rev 02 board like Centipede or Battlezone.

Well that makes perfect sense! LOL Thanks.
 
Back
Top Bottom