Atari PS/Big Blue question

shilmover

Well-known member
Joined
Oct 28, 2007
Messages
5,073
Reaction score
586
Location
Washington
I have a PS that I need to change big blue on. the cap I am replacing has a red mark near one of the posts, but no '-' or '+'. Which posts goes to which? Orange - ?? Purple - ??

Easier to ask here than to move cabs and remove 6 screws... :)
 
Let's see the cap. Usually these things are marked in different ways than other caps. let's see the outside and the bottom....
 
I can, but that's not the problem. the cap i am putting in is marked... just need to know if the purple wires are positive or negative.
 
The purple wires are ground wires and connect to the neg terminal. The orange are the 10volt dc and go to the positive.
 
Back
Top Bottom